PTFE lined stainless steel wire reinforced hydraulic hose for high temp and harsh conditions

SAE 100R14 Type A PTFE hydraulic hose consists polytetrafluorethylene (PTFE) inner tube and 303×× series stainless steel wire reinforced cover. PTFE tube is ideal for transferring super high and low temperature hydraulic fluids within -65°F to +400°F. Stainless steel wire braid will not be affected harsh environments including damp environment, oils, chemicals, abrasions and all weathers.

SAE 100R14 PTFE medium pressure hydraulic hose is widely used in air compressor discharge, hot oil and fluids, hot and greasy environments.

Product description:

Tube: PTFE tube;
Cover: 303×× series stainless steel wire;
Reinforcement: 303×× series stainless steel wire;
Max working pressure: 1523psi at 5/16" I.D.;
Working temperature: -65°F to +400°F (-54°C to +204°C); Static: -65°F to +450°F (-54°C to +232°C);
Min bend radius: 75mm at 5/16" I.D.;
Inside diameter: 5/16 - 1-1/4;
Safety factor: 4:1;
Pressure gratide: medium.

Remark: Hydraulic hose that meets or exceeds SAE 100R14 specifications is bespoke. Send us your specified data when order.

SAE 100R14 Medium High Pressure Hydraulic Hose
Part No.	Metric Size	Inch Size	SAE Dash Size	Hose I.D.		Hose O.D.		Max. Working Pressure		Min Bend Radius
				Min	Max	Min	Max	psi	bar	mm
MR14-5	6.3	5/16	-5	6	6.9	8.9	10.1	1523	105	75
MR14-6	8	3/8	-6	7.5	8.4	10.4	11.6	1523	105	100
MR14-7	10	7/16	-7	9.1	10	12.2	13.4	1523	105	125
MR14-8	11	1/2	-8	9.9	10.9	12.9	14.3	1015	70	135
MR14-10	12.5	5/8	-10	12.3	13.3	15.3	16.8	812	56	165
MR14-12	16	3/4	-12	15.3	16.5	18.6	20.1	812	56	200
MR14-14	19	7/8	-14	18.4	19.6	21.3	23.3	812	56	230
MR14-16	22	1	-16	21.4	23	24.6	26.9	812	56	230
MR14-18	25	1-1/8	-18	24.6	26.2	27.8	29.8	812	56	300
MR14-20	29	1-1/4	-20	27.8	29.4	31.9	33.5	609	42	410

Notes:

1. 1Mpa = 10 bar = 145 psi;
2. Bend radius measured inside of the bend;
3. SAE dash size the same as inside diameter.